|
|
|
|
|
PMTs: Regulated High Voltage Power Supplies |
||
| CA
Series The CA Series of high performance, precision regulated, low ripple power supplies offer improved performance and added features, allowing these miniature models to replace much larger, more expensive power supplies in many applications. Available Options: 5V Input Power Option Extended Operating Temperature Option (-55 to +700C) |
 |
|
| C
Series The C Series is a line of miniature, regulated high voltage power supplies featuring high stability and low ripple. The output is linearly programmable from 0 to 100% via a DAC compatible 0 to 5V programming input. Very low EMI/RFI have been achieved by using a quasi-sinewave oscillator, shielded transformer, filtering and a steel case. These power supplies mount on a PC board and occupy less than one cubic inch of volume. |
 C12-5 C12-5N C20 C20N C30 C30N C40 C40N C50 C50N C60 C60N C80 C80N |
|
|
 Model 10077 |
|
| Octo-Channel HV System The EMCO Octo-Channel is a High Voltage System for PMT's, Detectors, Wire Chambers, and Other Uses. The Octo-Channel System is a high performance, easy to use system providing eight regulated, independently programmable high voltage outputs. Output voltages from 200V through 8kV, positive or negative, are offered. Each output features high accuracy, high stability and very low ripple. Each channel has a 1000:1 output voltage monitor. This model is packaged in a rack mount enclosure. |
 Octo-Channel HV System |
|
|
Proportional, PC mount modules feature an output voltage that is controlled by varying the input voltage. |
|
| Q
Series The Q Series is a broad line of ultra-miniature, DC to HV DC converters supplying up to 5,000 volts in 0.125 cubic inches and up to 10,000 volts in 0.614cubic inches. These component-sized converters are ideal for applications requiring minimal size and weight.
|
|
| G
Series The G Series are compact, low cost 1.5 watt DC to HV DC converters that mount on a PC board. The isolated output is linearly proportional to the input voltage. Low ripple, noise and EMI/RFI have been achieved by means of a quasi-sinewave oscillator, shielded transformer and output filtering. Model GPMT has been specifically designed for low power PMT applications and features input current of less than 15 mA (8 mA typical). |
|
| L
Series The L Series are low noise, proportional models that feature an output range of 0 to +/- 300 thru 0 to +/- 3,000VDC with output power of 1.5 Watts. |
|
| E
Series The E Series are 3 watt DC to HV DC converters that feature more output power than the G Series, more output filtering and more input filtering using a large toroidal choke between two high performance electrolytic capacitors. The result is lower ripple on the output and lower noise on the power leads. The E Series also features multiple pin-pattern options. |
|
| F
Series The F Series incorporates all of the features of the E Series but produces 10 watts of output power in a compact, pc mount metal enclosure. This increased power can be used to power many PMT's, greatly reducing system cost. |
F10 |
 See our new featured, technical article, Using HV supplies in space-constrained systems, in the March 2007 issue of Electronic Products Magazine. |
|
Safety Warning
High voltage power supplies present a serious risk of personal injury if not used in accordance with design and/or use specifications, if used in applications on products for which they are not intended or designed, or if they are used by untrained or unqualified personnel. Before testing, incorporating or using EMCO’s products, read, understand and thereafter adhere to all instructions, protocol, cautions and safety procedures applicable not only to EMCO’s products but to each product and/or application into which EMCO’s products are incorporated or assembled.
 |
Return to our home page |
|
Contact EMCO |
|
World-wide Sales Offices |
e-mail
us
GPMT
L10
E10